How many seats not securely fastened to the bus are usually allowed?

not allow the rider to do it. 26. Normally, you are allowed no seats (0) that are not securely fastened to the bus.

How many passengers can fit on a bus?

A typical bus will have around 56 seats depending on the manufacturer and model, but they can have anywhere from 36 to 60 seats. For a more compact vehicle, consider renting a minibus, which typically seats fewer than 35 passengers.

When traveling at 50 miles per hour in a 40 foot bus how many seconds of space should you keep between you and the vehicle in front of you?

At greater speeds, you must add 1 second for safety. For example, if you are driving a 40 – foot vehicle, you should leave 4 seconds between you and the vehicle ahead. In a 60- foot rig, you will need 6 seconds. Over 40 mph, you would need 5 seconds for a 40 – foot vehicle and 7 seconds for a 60- foot vehicle.

You might be interested:  Quick Answer: How Many People Fit In A Bus?

Which of the following types of cargo can never be carried on a bus?

Buses must never carry: Division 2.3 poison gas, liquid Class 6 poison, tear gas, irritating material. More than 100 pounds of solid Class 6 poisons. Explosives in the space occupied by people, except small arms ammunition.

When driving a bus you should look?

Passenger Endorsment

Question Answer
When driving a bus you should look ______ seconds ahead. 12-15 seconds
Which of these statements about seeing ahead is true? Good drivers shift there attention back and forth, near and far.
You should check your mirrors: Regularly as a part of your scan for potential hazards.


How far should you stop from a drawbridge?

You must stop at least 50 feet from the draw bridge (unless it is controlled by a traffic signal or traffic control attendant). For railroad crossings, you must stop 15 to 50 feet from the crossing. These could both show up on your written exam.

How many passengers can be on a single decker bus?

Now, double- decker buses can carry 30 passengers, while single – deckers, depending on size, can carry either 11 or 14 passengers.

How many seats does a luxury bus have?

56 Seater ( Luxury Bus )

How many seats are in an average school bus?

Coinciding with their seating configuration, school buses have a higher seating capacity than buses of a similar length; a typical full-size school bus can carry from 66 to 90 passengers.

When driving what is the 3 second rule?

Simply leave 3 seconds worth of room between you and the vehicle you are following. Just watch the vehicle in front of you pass a road sign or other inanimate object on the side of the road and count out “One Massachusetts, Two Massachusetts, Three Massachusetts” before your vehicle passes that same object.

You might be interested:  Often asked: What Is The Penalty For Passing A Stopped School Bus?

What is the 4 second rule while driving?

The 4 second rule’s main purpose is to ensure drivers stay at least 4 seconds behind the car in front of them. 4 seconds is proven to be the adequate distance to prevent crashes, contradicting previous estimates of 2-3 seconds.

How many seconds is a safe following distance?

The Three- Second Rule Increasing the distance between you and the car ahead can help give you the time you need to recognize a hazard and respond safely. The National Safety Council recommends a minimum three- second following distance. Determining the three- second gap is relatively easy.

What must be closed whenever the bus is in motion?

The doors of a school bus shall be closed while the bus is in motion, whether or not there are passengers in the school bus. (g) Emergency Exits. While a passenger is aboard, no bus shall be put in motion with any emergency exit locked or otherwise secured against being opened from the inside.

What are some hazardous materials you can transport by bus?

7. What are some hazardous materials you can transport by bus?

  • Poison, tear gas, and irritating materials.
  • Small arms ammunition, hospital supplies, and drugs.
  • Explosives and radioactive materials.

Which of these is a good rule for backing a straight bus?

When backing a car, straight truck or bus, turn the top of the steering wheel toward the direction you want to go. When backing a trailer, turn the steering wheel in the opposite direction.

Leave a Reply

Your email address will not be published. Required fields are marked *