What is meant by a bus?

A bus is a subsystem that is used to connect computer components and transfer data between them. For example, an internal bus connects computer internals to the motherboard. A bus may be parallel or serial. Parallel buses transmit data across multiple wires.

What are the 3 types of buses?

Three types of bus are used.

  • Address bus – carries memory addresses from the processor to other components such as primary storage and input/output devices.
  • Data bus – carries the data between the processor and other components.
  • Control bus – carries control signals from the processor to other components.

What are the different types of buses?

Types of buses

  • Coach / Motor coach.
  • School bus.
  • Shuttle bus.
  • Minibus.
  • Minicoach.
  • Double-decker bus.
  • Single-decker bus.
  • Low-floor bus.

Why is it called a bus?

A quick look at wikipedia, and we learned that the word ‘ bus ‘ is the shortened form of the Latin word ‘omnibus’. “Omnes Omnibus” was a pun on the Latin sounding name of that hatter Omnès: omnes meaning “all” and omnibus means “for all” in Latin. Nantes citizens soon gave the nickname of Omnibus to the vehicle.

You might be interested:  Question: Insulating A School Bus?

What is bus speed?

Bus speed usually refers to the speed of the front side bus (FSB), which connects the CPU to the northbridge. FSB speeds can range from 66 MHz to over 800 MHz. Since the CPU reaches the memory controller though the northbridge, FSB speed can dramatically affect a computer’s performance.

What is bus structure?

Bus structures in computer plays important role in connecting the internal components of the computer. The bus in the computer is the shared transmission medium. This means multiple components or devices use the same bus structure to transmit the information signals to each other.

What are the big buses called?

An articulated bus, also referred to as a bendy bus, tandem bus, vestibule bus, stretch bus, or an accordion bus, (either a motor bus or trolleybus) is an articulated vehicle used in public transportation.

What is bus system on the motherboard?

Buses are circuits on the motherboard that connect the CPU to other components. There are many buses on the motherboard. A bus moves instructions and data around the system. The speed of a bus is measured in megahertz (MHz). The faster the bus, the faster data is communicated.

What is a bus port?

The term ” bus port ” is used in EPLAN as a short term for PLC connection points with function definitions of the category “Network / bus cable connection”. A bus port represents a plug including all pins and is represented by only one function template in the parts management.

What is bus width?

Bus width refers to the number of bits that can be sent to the CPU simultaneously, and bus speed refers to the number of times a group of bits can be sent each second. A bus cycle occurs every time data travels from memory to the CPU.

You might be interested:  Question: What Is Scsi Bus?

Which one is not type of bus?

Discussion Forum

Que. Which of the following is not a type of bus in computer?
b. address bus
c. timer bus
d. control bus
Answer:timer bus

What is the full form of bus?

In computer architecture, a bus (shortened form of the Latin omnibus, and historically also called data highway) is a communication system that transfers data between components inside a computer, or between computers.

What is a bus used for?

Bus, any of a class of large, self-propelled, wheeled vehicles that are designed to carry passengers, generally on a fixed route. They were developed at the beginning of the 20th century to compete with streetcars by providing greater route flexibility. The bus was a natural outgrowth of the horse-driven coach.

What engine is in a bus?

Torque — and Why it Matters for School Buses

CUMMINS B6.7 DIESEL ENGINE CUMMINS WESTPORT B6.7N NATURAL GAS ENGINE
200-300 HP 200-240 HP
660 LB-FT PEAK TORQUE 560 LB-FT PEAK TORQUE
660 LB-FT TORQUE AVAILABLE FROM 1300-2300 RPM 560 LB-FT TORQUE AVAILABLE FROM 1500-2200 RPM

What is a bus in police terms?

The ” bus ” refers to the ambulance. OgnjenO/Shutterstock. Used especially in New York City, saying “put a rush on the bus ” refers to when a cop wants an ambulance to respond quickly. It’d most likely be used when a victim’s injury appears life-threatening.

Leave a Reply

Your email address will not be published. Required fields are marked *